My LaMetic clock displays 'clock symbol' - FEL - 'PC monitor' and nothing else. Attempting to reset it did not prevent this form happening. Please help!
Could you please drop an email on firstname.lastname@example.org with the issue? We'll send you further solutions on this.
Thanks in advance.
It would be better if solutions to problems like this were posted here or in an FAQ page, as opposed to only giving them out via e-mail.
Thank you for your feedback.
Recently we published article solution to case when 'FEL' appears - https://help.lametric.com/support/solutions/articles/6000257445-lametric-device-displays-fel-. Other troubleshootings we posted you can find here - https://help.lametric.com/support/solutions.
If you have any other questions write back us anytime or contact directly email@example.com.
I have the same issue, the solution provided above makes no change, any suggestions ?
What more specifically did you do, what steps ? and did you use a Windows PC/Mac or Linux ?
any help or guidance would be greatly appreciated.
Thanks for the reply, did the "clock" - Fel - "Computer" on the display disappear when you connected to the PC, or were you able to start the "recovery" mode ? ("Volume-UP" + action button on top )
ok so it automatically started updating once connected to the PC ?